Does your iPad 10 show that it is charging but the battery percentage does not increase, suffer from unusual battery drain or fail to communicate correctly through its USB-C connection?
Console Wizard provides a professional iPad 10 charging IC repair and 610A3C replacement service for charging and USB communication faults caused by failure of this component on the iPad's logic board.
For £89.99, our engineers diagnose the charging fault and carry out component-level micro-soldering to replace the faulty 610A3C charging IC where this component is responsible for the problem.
This is a specialist logic-board repair requiring precision micro-soldering equipment and experience working with densely populated iPad circuit boards.
A successfully completed repair receives our standard 3-month warranty covering the original repaired fault.
Common iPad 10 Charging IC Fault Symptoms
A faulty charging-control IC can produce symptoms that are easily confused with a damaged USB-C port or deteriorated battery.
Possible symptoms include:
• Charging symbol appears but battery percentage does not increase
• Battery percentage continues falling while connected to a charger
• Unusually rapid battery drain
• iPad fails to charge correctly
• USB connection or communication problems
• Computer does not recognise the iPad correctly
• iPad will not power on
• iPad becomes stuck during the boot process
These symptoms can also have other causes, so correct diagnosis is important before replacing the charging IC.
iPad Shows Charging but Battery Percentage Does Not Increase
One symptom associated with charging-circuit faults is sometimes described as fake charging.
The iPad recognises that a charger has been connected and displays the charging symbol, but the battery percentage remains unchanged or may even continue to decrease.
This is different from a physically damaged USB-C port where the iPad may repeatedly connect and disconnect as the cable is moved.
If the physical USB-C connection is functioning correctly but the iPad is not managing the charging process properly, the logic-board charging circuitry may require investigation.
What Is the 610A3C Charging IC?
The 610A3C IC is a small electronic component located on the iPad's logic board and forms part of the circuitry involved in USB and charging operation.
Although physically tiny, failure of a charging-control component can affect the way the iPad interacts with connected charging and USB equipment.
Unlike replacing a battery or an external connector, repairing this fault requires work directly on the iPad's logic board.
The defective IC must be removed without damaging the surrounding microscopic components or circuit-board pads before the replacement component can be installed.
Professional Component-Level 610A3C Repair
This repair involves component-level micro-soldering rather than replacing the complete iPad logic board.
Once diagnosis indicates that the 610A3C IC is responsible for the fault, the iPad is professionally dismantled to access the logic board.
The faulty IC is removed using specialist micro-soldering equipment while protecting the surrounding components.
The logic-board pads are then prepared before the replacement IC is correctly positioned and soldered into place.
After the repair, charging and USB functionality are tested before the iPad is reassembled.
What Does Our iPad 10 Charging IC Repair Include?
Our professional iPad 10 610A3C charging IC repair includes:
• Charging fault diagnosis
• Professional dismantling of the iPad
• Logic-board inspection
• Component-level micro-soldering
• Removal of the faulty 610A3C IC
• Replacement charging IC installed
• Charging functionality testing
• USB communication testing
• Professional reassembly
• 3-month warranty covering the original repaired fault
Charging IC Fault or USB-C Port Fault?
Not every iPad 10 charging problem requires a charging IC replacement.
The iPad 10 also has a physical USB-C charging port which can become damaged through wear, contamination or accidental damage.
A physically damaged USB-C socket may cause symptoms such as:
• Charging starts and stops when the cable moves
• USB-C plug feels loose
• Bent or damaged contacts are visible inside the socket
• Charging only works when the cable is held at an angle
Console Wizard provides a separate iPad 10 USB-C charging port replacement service for these faults.
If the physical USB-C socket is undamaged but the iPad is not correctly controlling the charging or USB connection, a logic-board charging fault may instead be responsible.
Charging IC Fault or Battery Fault?
A deteriorated battery can also cause symptoms that appear similar to charging-circuit problems.
If the iPad charges normally to 100% but then loses its charge unusually quickly during normal use, battery deterioration may be the more likely cause.
A charging IC fault can instead interfere with the charging process itself, USB communication or the iPad's response to connected charging equipment.
Console Wizard provides a separate iPad 10 battery replacement service where the internal battery is responsible for the problem.
Correct diagnosis helps avoid replacing a battery, USB-C port or charging IC unnecessarily.
iPad 10 Not Recognised by a Computer
The USB-C connection on an iPad carries data as well as charging power.
This means a fault within the USB or charging circuitry can potentially affect communication with a computer as well as battery charging.
If your iPad charges but is not correctly detected when connected to a known-working computer and USB-C cable, the physical port and associated logic-board circuitry may require investigation.
A damaged USB-C socket can also cause data connection problems, so the charging IC should not automatically be assumed to be faulty.
Can a Charging IC Fault Cause Rapid Battery Drain?
Charging and power-management faults can sometimes be associated with abnormal current consumption and unusually rapid battery discharge.
However, rapid battery drain alone does not prove that the 610A3C IC is faulty.
An ageing battery, software activity or another logic-board fault can also cause excessive battery consumption.
Diagnosis is therefore particularly important when rapid battery drain is the main symptom.
What Can Cause an iPad Charging IC to Fail?
Electronic charging circuitry can fail for several reasons.
Potential contributing factors can include:
• Faulty charging cables
• Poor-quality charging accessories
• Electrical faults from connected USB equipment
• Previous liquid damage
• Short circuits elsewhere within the charging circuit
• Component failure on the logic board
In some cases there may be no obvious external event immediately before the fault develops.
We therefore diagnose the charging system rather than assuming that a particular charger or cable caused the failure.
Why Diagnosis Is Important
An iPad 10 that will not charge can have several different faults which produce similar symptoms.
Possible causes include:
• Faulty USB-C cable or power adapter
• Damaged USB-C charging port
• Faulty or deteriorated battery
• 610A3C charging IC fault
• Other logic-board charging faults
• Liquid or corrosion damage
Replacing the charging IC will not resolve a fault caused by a physically damaged USB-C port or defective battery.
Our engineers therefore investigate the charging system to identify the actual cause of the problem before carrying out unnecessary component replacement.
Specialist iPad Logic Board Micro-Soldering
The components surrounding the 610A3C IC are extremely small and closely positioned on the iPad logic board.
Replacing the IC requires controlled heat, precision equipment and microscope-assisted micro-soldering.
The objective is to repair the fault at component level while retaining the original iPad logic board wherever it remains technically repairable.
This avoids replacing the complete logic board simply because an individual electronic component has failed.
iPad 10 A2696 & A2757 Charging IC Repair
This service covers compatible iPad 10th Generation models including A2696 and A2757.
Apple has produced numerous iPad generations with different internal components, so it is important to select the correct repair for your particular model.
If you are unsure which iPad you own, check the model number before ordering or contact Console Wizard for assistance.
3-Month iPad 10 Charging IC Repair Warranty
A successfully completed iPad 10 610A3C charging IC repair receives our standard:
3-month warranty covering the original repaired fault.
The warranty applies to the original fault and component-level repair carried out by Console Wizard.
It does not provide a general warranty covering unrelated components or different faults that subsequently develop.
New accidental, physical or liquid damage occurring after the repair is also not covered by the original repair warranty.
iPad 10 Charging IC Repair in Bolton
Looking for a specialist iPad charging repair in Bolton?
Console Wizard carries out component-level iPad logic-board repairs from our repair centre at 517 Tonge Moor Road, Bolton, Greater Manchester, BL2 3BG.
Local customers can bring their iPad directly to us during our normal opening hours.
No appointment is required.
UK-Wide iPad 10 Logic Board Repair
You do not need to live near Bolton to use Console Wizard.
Our UK-wide iPad repair service allows customers throughout the country to send their iPad 10 to our repair centre for specialist charging IC and component-level logic-board repair.
The iPad is professionally diagnosed, repaired and tested before being returned to you.
iPad 10 Charging IC Repair FAQs
How much is an iPad 10 610A3C charging IC repair?
Our iPad 10 charging IC repair service is £89.99.
What is fake charging on an iPad?
Fake charging describes a situation where the iPad appears to recognise the charger and may display the charging symbol, but the battery percentage does not increase correctly.
Does fake charging always mean the charging IC is faulty?
No. Battery, USB-C port and other logic-board faults can produce charging problems, so diagnosis is required to establish the actual cause.
Can you replace the 610A3C IC?
Yes. Where diagnosis confirms that this component is faulty, our engineers can carry out component-level micro-soldering to remove and replace the IC.
Is this the same as replacing the USB-C charging port?
No. The USB-C port is the physical connector into which the charging cable is inserted. The 610A3C is an electronic component within the iPad's logic-board circuitry. We provide a separate USB-C port repair service.
Can a charging IC fault stop the iPad connecting to a computer?
Charging and USB circuitry faults can affect communication through the USB-C connection. A physically damaged USB-C port can also cause this symptom.
Can this fault cause rapid battery drain?
Charging-circuit faults can sometimes be associated with abnormal battery consumption, although rapid battery drain can also be caused by a deteriorated battery, software or another hardware fault.
Do poor-quality USB-C chargers damage the charging circuit?
Faulty or poor-quality charging equipment can potentially contribute to electrical charging faults, but it is not possible to assume that this is the cause of every failed charging IC.
Does this repair have a warranty?
Yes. A successfully completed repair receives our standard 3-month warranty covering the original repaired fault.
Can I send my iPad to you?
Yes. Console Wizard provides a UK-wide iPad repair service, as well as accepting devices directly at our Bolton repair centre.
Why Choose Console Wizard for iPad 10 Charging IC Repair?
Console Wizard specialises in component-level electronic repairs and precision micro-soldering.
The 610A3C is a small logic-board component, so this repair requires considerably more than replacing an external charging socket or battery.
Our engineers diagnose the charging system before carrying out component replacement, helping distinguish between USB-C port, battery, charging IC and other logic-board faults.
Where the 610A3C is responsible, the defective component is professionally removed and replaced while retaining the original logic board.
A successfully completed repair receives our standard 3-month warranty covering the original repaired fault.
Console Wizard has provided professional electronics repair services since 2008, with component-level repairs carried out from our repair centre in Bolton, Greater Manchester.
Local customers can bring their iPad directly to us, while our UK-wide repair service allows customers throughout the country to send their iPad 10 to us for specialist charging IC repair.
Security policy
Delivery policy
Return policy